IMS_BULLDOGS wrote:...Everyone can participate...
Except me :(
IMS_BULLDOGS wrote:...Everyone can participate...
BBmine wrote:IMS_BULLDOGS wrote:...Everyone can participate...
Except me :(
octacian wrote:Anyways, you'll probably see me around more often next week :P
ExeterDad wrote:IMS Congrats on the new position! I'm confident you will bring much to HOMETOWN.
But mostly.... I'm excited to see what you've got cooking with these buildoffs!
Love ya man!
ExeterDad wrote:P.S. To my knowledge your recording is a first at HOMETOWN. Thanks!
RealGoldenHart wrote:Interesting role play by GD, kiko, and DvD
maikerumine wrote:https://www.youtube.com/watch?v=F_xGDK3EmwI
Whoah... I'm impressed!!!!! Your server is stunning!!!
I will gather the fam to all play. :)
BBmine wrote:You mean this selfie, Kibbie?
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-2-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.10
Device Model: ST3160815AS
Serial Number: 6RX95CQY
Firmware Version: 4.AAA
User Capacity: 160,041,885,696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Tue Mar 21 20:31:39 2017 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 54) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1194
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 088 060 030 Pre-fail Always - 787927061
9 Power_On_Hours 0x0032 044 044 000 Old_age Always - 49897
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1192
187 Reported_Uncorrect 0x0032 080 080 000 Old_age Always - 20
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 049 037 045 Old_age Always In_the_past 51 (Min/Max 31/53 #1235)
194 Temperature_Celsius 0x0022 051 063 000 Old_age Always - 51 (0 23 0 0 0)
195 Hardware_ECC_Recovered 0x001a 076 066 000 Old_age Always - 5796708
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 20 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 20 occurred at disk power-on lifetime: 38092 hours (1587 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 fd 90 07 e0 Error: UNC at LBA = 0x000790fd = 495869
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 f8 90 07 e0 00 00:00:59.721 READ DMA EXT
ea 00 00 ff ce f7 a0 00 00:01:03.410 FLUSH CACHE EXT
c8 00 10 f0 ce f7 e9 00 00:01:03.393 READ DMA
ca 00 08 78 0a c6 ed 00 00:01:03.392 WRITE DMA
ea 00 00 e7 ce f7 a0 00 00:01:03.392 FLUSH CACHE EXT
Error 19 occurred at disk power-on lifetime: 38092 hours (1587 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 fd 90 07 e0 Error: UNC at LBA = 0x000790fd = 495869
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 f8 90 07 e0 00 00:00:59.721 READ DMA EXT
ca 00 40 38 0a c6 ed 00 00:00:59.709 WRITE DMA
27 00 00 00 00 00 e0 00 00:00:59.657 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 02 00:00:59.651 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 02 00:00:56.330 SET FEATURES [Set transfer mode]
Error 18 occurred at disk power-on lifetime: 38092 hours (1587 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 fd 90 07 e0 Error: UNC at LBA = 0x000790fd = 495869
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 f8 90 07 e0 00 00:00:52.521 READ DMA EXT
27 00 00 00 00 00 e0 00 00:00:52.521 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 02 00:00:52.503 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 02 00:00:52.503 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:00:56.330 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 17 occurred at disk power-on lifetime: 38092 hours (1587 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 fd 90 07 e0 Error: UNC at LBA = 0x000790fd = 495869
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 20 f8 90 07 e0 00 00:00:52.521 READ DMA EXT
35 00 b0 90 b8 86 e0 00 00:00:52.521 WRITE DMA EXT
35 00 a8 e8 b7 86 e0 00 00:00:52.503 WRITE DMA EXT
ea 00 00 37 0a c6 a0 00 00:00:52.503 FLUSH CACHE EXT
ca 00 08 30 0a c6 ed 00 00:00:52.464 WRITE DMA
Error 16 occurred at disk power-on lifetime: 38092 hours (1587 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 fd 90 07 e0 Error: UNC at LBA = 0x000790fd = 495869
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 f8 90 07 e0 00 00:00:45.998 READ DMA EXT
c8 00 60 b8 d4 bc e9 00 00:00:45.996 READ DMA
c8 00 08 a8 d4 bc e9 00 00:00:45.984 READ DMA
27 00 00 00 00 00 e0 00 00:00:45.926 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 02 00:00:45.918 IDENTIFY DEVICE
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 49886 -
# 2 Short offline Completed without error 00% 49886 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Fixerol wrote:Map itself is more or less done, way to the map building will probably 3 wide of stone+cobble+mossy with squared and lamps and some leaves along the way, but main question is building style of map building itself, two stories, roof will be partially glassy to pass more light onto map, will be good if you decide materials that fit city (walls, roof). Still long way before done.
This is approximation of server map (2000x2000 nodes) published above, done in 20x20 nodes, 1:100 scale (each square is 100x100 nodes of the world).
RealGoldenHart wrote:You should add an updated picture of Fixer's build, kibbie, it looks even cooler now. :D
Users browsing this forum: No registered users and 23 guests