Page 1 of 1
Problem...

Posted:
Mon Aug 08, 2011 11:54
by mamamine
Well when I start minetest his(her,its) work, but after a while... Writes his to me "Minetest has to stop working"
And then his stop...
PS: I am French, if could make a translation shall be no refusal :D

Posted:
Mon Aug 08, 2011 12:41
by Karlas
Tell us more about your cimputer.
French:
Parlez-nous de votre cimputer.
used google translate

Posted:
Mon Aug 08, 2011 14:28
by Calinou
Karlas, "Parlez-nous de votre ordinateur..."
mamamine, je sais vraiment pas, au pire envoie-moi un message privé en français avec des détails...

Posted:
Mon Aug 08, 2011 16:50
by Karlas
I said I used "Google Translate" ...

Posted:
Mon Aug 08, 2011 19:34
by No-Half-Measures
S'il vous plaît envoyer vos spécifications système et nous pouvons les aider davantage.
Système d'exploitation
RAM
type de processeur
type de GPU
Please post your System specs and we can help further.
Operating System
RAM
CPU Type
GPU Type

Posted:
Tue Aug 09, 2011 12:19
by mamamine
Oh ! Slowly you go too fast for me !

Posted:
Tue Aug 09, 2011 12:45
by Dogers
Il te demande seulement de fournir les caractéristiques système de ton ordinateur afin qu'on puisse t'aider a trouvé une solution a ton problème : notamment ton système d'exploitation c'est a dire (GNU/Linux , Mac , Windows ou autre) , ta mémoire vive (RAM) , ton processeur (CPU) et ta carte graphique (GPU) . Sur un ordinateur acheté en magasin tu peu trouvé toute ces infos sur la coque elle même sous forme d'autocollants (enfin , en général) . Sinon cherche un peu dans les infos systèmes , tels que des panneau de configurations ou des gestionnaires de taches , ou n'hésite pas a installer des logiciels tiers pour obtenir ces informations .
En espérant avoir été utile !

Posted:
Tue Aug 09, 2011 14:28
by Karlas
Good,Dogers is French

Posted:
Tue Aug 09, 2011 14:37
by Dogers
Indeed . Do you want I translate my previous post in English ?

Posted:
Tue Aug 09, 2011 17:53
by Karlas
No,its Ok.

Posted:
Wed Aug 10, 2011 09:53
by mamamine
I have windows

Posted:
Wed Aug 10, 2011 15:01
by sdzen
my windows 7 does not support Celeron's recomended version its 64bit with three gigabites of ram

Posted:
Wed Aug 10, 2011 16:12
by Karlas
Which version is it????

Posted:
Thu Aug 11, 2011 09:16
by Fixerol
Show last lines of your debug.txt with error

Posted:
Thu Aug 11, 2011 09:54
by mamamine
A last lines for my "Debug.txt" it's :
"INFO: Full run of init_mapnode with g_texturesource!=NULL"

Posted:
Thu Aug 11, 2011 10:13
by No-Half-Measures
At-least the last 20 lines please, not one line as that tells us nothing, thank you.

Posted:
Thu Aug 11, 2011 18:22
by mamamine
Ok ok... Hold :
" INFO: getTextureIdDirect(): "furnace_front.png^[forcesingle" NOT found in cache. Creating it.
INFO: getTextureIdDirect(): "furnace_front.png" found in cache
INFO: generate_image(): generating special modification "[forcesingle"
INFO: getTextureIdDirect(): "cobble.png" NOT found in cache. Creating it.
INFO: getTextureIdDirect(): "cobble.png^[forcesingle" NOT found in cache. Creating it.
INFO: getTextureIdDirect(): "cobble.png" found in cache
INFO: generate_image(): generating special modification "[forcesingle"
INFO: getTextureIdDirect(): "[inventorycube{cobble.png{cobble.png{cobble.png" NOT found in cache. Creating it.
INFO: generate_image(): generating special modification "[inventorycube{cobble.png{cobble.png{cobble.png"
INFO: getTextureIdDirect(): "mossycobble.png" NOT found in cache. Creating it.
INFO: getTextureIdDirect(): "mossycobble.png^[forcesingle" NOT found in cache. Creating it.
INFO: getTextureIdDirect(): "mossycobble.png" found in cache
INFO: generate_image(): generating special modification "[forcesingle"
INFO: getTextureIdDirect(): "[inventorycube{mossycobble.png{mossycobble.png{mossycobble.png" NOT found in cache. Creating it.
INFO: generate_image(): generating special modification "[inventorycube{mossycobble.png{mossycobble.png{mossycobble.png"
INFO: getTextureIdDirect(): "steel_block.png" NOT found in cache. Creating it.
INFO: getTextureIdDirect(): "steel_block.png^[forcesingle" NOT found in cache. Creating it.
INFO: getTextureIdDirect(): "steel_block.png" found in cache
INFO: generate_image(): generating special modification "[forcesingle"
INFO: getTextureIdDirect(): "[inventorycube{steel_block.png{steel_block.png{steel_block.png" NOT found in cache. Creating it.
INFO: generate_image(): generating special modification "[inventorycube{steel_block.png{steel_block.png{steel_block.png"
INFO: getTextureIdDirect(): "nc_side.png" NOT found in cache. Creating it.
INFO: getTextureIdDirect(): "nc_side.png^[forcesingle" NOT found in cache. Creating it.
INFO: getTextureIdDirect(): "nc_side.png" found in cache
INFO: generate_image(): generating special modification "[forcesingle"
INFO: getTextureIdDirect(): "nc_front.png" NOT found in cache. Creating it.
INFO: getTextureIdDirect(): "nc_back.png" NOT found in cache. Creating it.
INFO: getTextureIdDirect(): "nc_front.png^[forcesingle" NOT found in cache. Creating it.
INFO: getTextureIdDirect(): "nc_front.png" found in cache
INFO: generate_image(): generating special modification "[forcesingle"
INFO: getTextureIdDirect(): "nc_rb.png" NOT found in cache. Creating it.
INFO: getTextureIdDirect(): "nc_rb.png^[forcesingle" NOT found in cache. Creating it.
INFO: getTextureIdDirect(): "nc_rb.png" found in cache
INFO: generate_image(): generating special modification "[forcesingle"
Created main menu
Dropping main menu
Updating configuration file: "C:\Users\ali\AppData\Local\Temp\Rar$EX43.400\minetest-0.2.20110731_3-win32\bin/..//minetest.conf"
Changing value of "port" = "30000 # Port à utiliser pour le serveur" -> "30000"
Changing value of "address" = "# Adresse d’un serveur auquel se connecter, laissez vide" -> "# Adresse de votre serveur"
Changing value of "name" = "# Votre pseudo ingame" -> "serv # Nom du serveur"
Changing value of "new_style_leaves" = "false # Jolies feuilles – désactivez pour de meilleures performances" -> "0"
Changing value of "creative_mode" = "false # Mode créatif (inventaire illimité)" -> "0"
Changing value of "creative_mode" = "0 # Mode créatif (0 ou 1)" -> "0"
Changing value of "port" = "30000 # Port utilisé par le serveur" -> "30000"
Adding "enable_damage" = "1"
Adding "smooth_lighting" = "1"
INFO: Full run of init_mapnode with g_texturesource!=NULL "