Upcoming new shaders

[RealBadAngel]

Here are the results of my work with shaders so far, please do compare screenshots.
Visible wall texture is 512px, bilinear filtering and mipmapping is on.

Without shaders:


Iterative Parallax Mapping:


Iterative Parallax Mapping + Normal Bumpmapping:

[PilzAdam]

Fake.

[Inocudom]

This is impressive work, RealBadAngel. I know how pretty this effect is, because I saw it in action in Xonotic. This alone adds a new level of detail and beauty to Minetest.

Would you and VanessaE be willing to try this with her HDX texture pack (from 64px onwards?) I am anxious to see the results. I can get this effect to work in Xonotic, so I should be able to get it to work in Minetest as well (both games use OpenGL.)


Edit by sfan5: Don't quote the whole post goddamnit!

[Dan Duncombe]

I saw no difference between them at all.

[Inocudom]

I saw no difference between them at all.

The first one is flat looking, the second one looks a little more 3D, and the third one really looks 3D. If you were looking at the effect in-game, you would notice the difference. That I can most certainly promise you, because I have played (and still do play) Xonotic, and it has the same effect for textures in it.

[RealBadAngel]

Fake.

Sure:

[PilzAdam]

Fake.

Sure:

Source or it didnt happen.

[Inocudom]

Fake.

Sure:

Source or it didnt happen.

It looks like PilzAdam will be hard to convince. You might have to show him your branch of Minetest, RealBadAngel.

[RealBadAngel]

Fake.

Sure:

Source or it didnt happen.

Your phone or window isn't wide enough to display the code box. If it's a phone, try rotating it to landscape mode.

Code: Select all

uniform sampler2D myTexture;
uniform sampler2D normalTexture;

uniform vec4 skyBgColor;
uniform float fogDistance;
uniform float scale;

varying vec2 texCoord;
varying vec3 vPosition;
varying vec3 viewVec;
varying vec3 eyeVec;
varying vec4 vertexViewPos;
varying vec4 vertexProjPos;
varying vec3 tsPosition;
varying vec3 tsCameraPosition;
varying vec3 tsLightSource;

void main (void)
{

    float bumpScale = 0.15;
    float shininess = 1.0;
   
    vec4 normalMap;
    vec2 offset = gl_TexCoord[0].st;
    vec3 tsE = normalize(tsCameraPosition-tsPosition);
    vec2 viewTS = vec2(-tsE.x, -tsE.y);// (tsE.z);
    viewTS = normalize(viewTS);

    for(int i = 0; i < 3; i++) {   
        normalMap = texture2D(normalTexture, offset);
        float height = normalMap.a * 0.05 - 0.025;
        offset += height * normalMap.z * viewTS  * bumpScale ;
    }

   
    float alpha texture2D(myTexture, offset).a;
    vec3 base = texture2D(myTexture, offset).xyz;
    vec3 normal = texture2D(normalTexture, offset).xyz;

    vec3 vVec = normalize(viewVec);
    vec3 bump = normalize(normal * 2.0 - 1.0);
    vec3 R = reflect(-viewVec, bump);
    vec3 lVec = normalize(vec3(0.0, -0.4, 0.5));
    float diffuse = max(dot(lVec, bump), 0.0);
    float specular = pow(clamp(dot(R, lVec), 0.0, 1.0),1.0);
    vec3 color = diffuse * base + 0.4 * diffuse * specular;


    vec4 col = vec4(color.r, color.g, color.b, alpha);
    col *= gl_Color;
    col = col * col; // SRGB -> Linear
    col *= 1.8;
    col.r = 1.0 - exp(1.0 - col.r) / exp(1.0);
    col.g = 1.0 - exp(1.0 - col.g) / exp(1.0);
    col.b = 1.0 - exp(1.0 - col.b) / exp(1.0);
    col = sqrt(col); // Linear -> SRGB
    if(fogDistance != 0.0){
        float d = max(0.0, min(vPosition.z / fogDistance * 1.5 - 0.6, 1.0));
        alpha = mix(alpha, 0.0, d);
    }

    gl_FragColor = vec4(col.r, col.g, col.b, alpha);   
}

Btw, closer look at bricks...

[PilzAdam]

Sure:

Source or it didnt happen.

Your phone or window isn't wide enough to display the code box. If it's a phone, try rotating it to landscape mode.

Code: Select all

uniform sampler2D myTexture;
uniform sampler2D normalTexture;

uniform vec4 skyBgColor;
uniform float fogDistance;
uniform float scale;

varying vec2 texCoord;
varying vec3 vPosition;
varying vec3 viewVec;
varying vec3 eyeVec;
varying vec4 vertexViewPos;
varying vec4 vertexProjPos;
varying vec3 tsPosition;
varying vec3 tsCameraPosition;
varying vec3 tsLightSource;

void main (void)
{

    float bumpScale = 0.15;
    float shininess = 1.0;
   
    vec4 normalMap;
    vec2 offset = gl_TexCoord[0].st;
    vec3 tsE = normalize(tsCameraPosition-tsPosition);
    vec2 viewTS = vec2(-tsE.x, -tsE.y);// (tsE.z);
    viewTS = normalize(viewTS);

    for(int i = 0; i < 3; i++) {   
        normalMap = texture2D(normalTexture, offset);
        float height = normalMap.a * 0.05 - 0.025;
        offset += height * normalMap.z * viewTS  * bumpScale ;
    }

   
    float alpha texture2D(myTexture, offset).a;
    vec3 base = texture2D(myTexture, offset).xyz;
    vec3 normal = texture2D(normalTexture, offset).xyz;

    vec3 vVec = normalize(viewVec);
    vec3 bump = normalize(normal * 2.0 - 1.0);
    vec3 R = reflect(-viewVec, bump);
    vec3 lVec = normalize(vec3(0.0, -0.4, 0.5));
    float diffuse = max(dot(lVec, bump), 0.0);
    float specular = pow(clamp(dot(R, lVec), 0.0, 1.0),1.0);
    vec3 color = diffuse * base + 0.4 * diffuse * specular;


    vec4 col = vec4(color.r, color.g, color.b, alpha);
    col *= gl_Color;
    col = col * col; // SRGB -> Linear
    col *= 1.8;
    col.r = 1.0 - exp(1.0 - col.r) / exp(1.0);
    col.g = 1.0 - exp(1.0 - col.g) / exp(1.0);
    col.b = 1.0 - exp(1.0 - col.b) / exp(1.0);
    col = sqrt(col); // Linear -> SRGB
    if(fogDistance != 0.0){
        float d = max(0.0, min(vPosition.z / fogDistance * 1.5 - 0.6, 1.0));
        alpha = mix(alpha, 0.0, d);
    }

    gl_FragColor = vec4(col.r, col.g, col.b, alpha);   
}

You should hardcode the result of exp(1.0), Exio said it gives a nice FPS boost.

[RealBadAngel]

You should hardcode the result of exp(1.0), Exio said it gives a nice FPS boost.

Good idea

[Inocudom]

You should hardcode the result of exp(1.0), Exio said it gives a nice FPS boost.

What is exp(1.0) supposed to be, and how would it be able to speed up Minetest's FPS? If it can speed up Minetest's FPS, then it is a worthwhile effort, though it might be easier to do if more than one person works on it. Besides RealBadAngel, is there anyone else that is skilled in such an area?

[RealBadAngel]

You should hardcode the result of exp(1.0), Exio said it gives a nice FPS boost.

What is exp(1.0) supposed to be, and how would it be able to speed up Minetest's FPS? If it can speed up Minetest's FPS, then it is a worthwhile effort, though it might be easier to do if more than one person works on it. Besides RealBadAngel, is there anyone else that is skilled in such an area?

exp(1,0) equals 2.71828182846, constant called e
about shaders only person i know of who played a bit with them is Jeija
He made one geometry shader, waving water.

[PilzAdam]

about shaders only person i know of who played a bit with them is Jeija

kahrl wrote the whole shader support in Minetest, celeron55 rebased it and Exio found that exp(1.0) hardcoding thing out; so there are a few people who know whats going on.

[RealBadAngel]

about shaders only person i know of who played a bit with them is Jeija

kahrl wrote the whole shader support in Minetest, celeron55 rebased it and Exio found that exp(1.0) hardcoding thing out; so there are a few people who know whats going on.

Youre right.
As soon as i clean all the mess in shaders rewrite i will make the repo public.
Ive made changes not only to shaders themselves but to c++ code as well.

[Inocudom]

If any of you have ever played Xonotic, then you know how parallax mapping can really make textures come to life. It is a wonderful feature that I hope will find much use.

[Inocudom]

RealBadAngel might be on vacation right now, so it is best to wait until autumn for this (just like with many other things concerning Minetest.)

[Mito551]

Fake.

and gay.

[Inocudom]

Fake.

and gay.

What is wrong with parallax mapping? It makes textures look more real. Check out Xonotic if you don't believe me.

It is starting to sound as if only me, VanessaE, and RealBadAngel himself will use this. I hope I can be proved wrong to that end.

[Chinchow]

Fake.

and gay.

What is wrong with parallax mapping? It makes textures look more real. Check out Xonotic if you don't believe me.

It is starting to sound as if only me, VanessaE, and RealBadAngel himself will use this. I hope I can be proved wrong to that end.

IIf normal sharers cause redness everywhere then what effect will this have if my graphics card isn't good enough?

[VanessaE]

The red comes from the shaders being written in a language (GLSL) that your video driver mode (probably DirectX) doesn't understand. You either have to switch to OpenGL mode, or you won't be able to use shaders at all.

[Dan Duncombe]

The red comes from the shaders being written in a language (GLSL) that your video driver mode (probably DirectX) doesn't understand. You either have to switch to OpenGL mode, or you won't be able to use shaders at all.

Since there's an ability to use bumpmapping my shaders doesn't work. Everything is red. But before it worked.

Could we have an option for bumpmapping without shaders? That would be nice.

[Inocudom]

The red comes from the shaders being written in a language (GLSL) that your video driver mode (probably DirectX) doesn't understand. You either have to switch to OpenGL mode, or you won't be able to use shaders at all.

Since there's an ability to use bumpmapping my shaders doesn't work. Everything is red. But before it worked.

Could we have an option for bumpmapping without shaders? That would be nice.

According to the page beyond the link below, it might be possible:
http://irrlicht.sourceforge.net/forum/viewtopic.php?p=169729

Concerning shaders for DirectX, the post beyond the link below shows how likely such a thing is:
https://forum.minetest.net/viewtopic.php?pid=103046#p103046

[Mito551]

RBA, any chance you could demonstrate how that looks with 16/32px textures?

[Inocudom]

RBA, any chance you could demonstrate how that looks with 16/32px textures?

It might not look good with those, but 64px and above should look fine.

[Mito551]

RBA, any chance you could demonstrate how that looks with 16/32px textures?

It might not look good with those, but 64px and above should look fine.

i suspect. that's why i ask.

[philipbenr]

Btw, closer look at bricks...

They look a bit glassy to me, but this is so COOL I would love to try this.

[wburton72]

Thank you for your hard work!!

[Mito551]

RBA, any chance you could demonstrate how that looks with 16/32px textures?

so?

[Inocudom]

RBA, any chance you could demonstrate how that looks with 16/32px textures?

so?

RealBadAngel seems to be on vacation right now, as I have not seen him in the irc chat rooms lately. Wait until autumn.