[mod] nodebox_trees [nodebox_trees]

[toby109tt]

Yes the texture flickering is a bit anoying but I dount think it's possible to fix :/

[TumeniNodes]

Yes the texture flickering is a bit anoying but I dount think it's possible to fix :/

I guess I'm ca-raaazy... cus I like the flickering :P
although I do see where it could be seizure inducing... : /

Maybe if you try to reduce the size of the "X" in the model? That might reduce it somewhat.. Because I have noticed it is that protrusion which causes it, when two ends from different nodes are meeting/touching.
Or rather than reducing it's size, thicken the X a bit... being so thin may also be the cause because you are jumping from one side to the other of an extremely thin object, and the images/textures are reversed from one side to the other, giving it that animated effect

[D00Med]

Reducing the size would defeat the purpose of having it.
The best solution I can think of could be to have the nodes with random offsets, but I don't know if that is possible.

[TumeniNodes]

Reducing the size would defeat the purpose of having it.
The best solution I can think of could be to have the nodes with random offsets, but I don't know if that is possible.

That's why I added an idea of possibly making it a bit thicker (just the X portion of the model) I did not look at the model yet but it appears to be a hybrid cube and plantlike X ?

You should be able to thicken that part.., I do believe it is the fact it is paper thin is creating this flickering for reasons I stated before.
Because I do agree, if you reduce it, it will completely remove the overall quality it produces for leaves

[D00Med]

If the model gets thicker, then the nodes beside it will too, and then they will overlap anyway.
It's because the faces are overlapping, which would happen regardless of the thickness(the faces would still overlap)

[TumeniNodes]

If the model gets thicker, then the nodes beside it will too, and then they will overlap anyway.
It's because the faces are overlapping, which would happen regardless of the thickness(the faces would still overlap)

ahhhhh... I didn't think of that... hmmmmm

Well then, there's only one thing for it.... deny, deny, deny :D

"What's that flickering?"

"What flickering? 0_o

"Right there...., that flickering" (points to video)

"I don't see any flickering... are you feeling ok? you look a little peaked"
:P

[D00Med]

xD

[Nathan.S]

I've not looked at the model but if it is an X shape, try rotating it a degree or two, it should move the faces out of each other.

[D00Med]

"try rotating it a degree or two" - yes it works! Thankyou! Now I just have to make new schematics to use the rotation.
Edit: *cough* nope, just my imagination and bad testing.
Edit edit: I fixed some flickering on the top and bottom faces

[Nathan.S]

Looking at the git repo I notice that you are using .b3d models, unless there is some animation you'd probably be better off using .obj as they are usually smaller files.

I've never used schematics, but I don't think you should need to change that after tweaking the rotation of a model that makes up a schematic. They are still the same nodes, just a little different visually.

[D00Med]

Ok then, I will use them instead, thanks for the tip.
The rotation doesn't work with the same angle for every node. I thought I could use "degrotate" as paramtype2 and make each node have different rotation, which would fix the flickering.

[Nathan.S]

I thought you meant rotating the file itself, not the degrotate. I'll try and take at this this weekend, I think it should be a simple solution, but what do I know.

[TumeniNodes]

The rotation doesn't work with the same angle for every node. I thought I could use "degrotate" as paramtype2 and make each node have different rotation, which would fix the flickering.

You gotta wiggle it....

wiggle it??

Yep..., just a little bit....

:D

<edit> Not sure if you already looked into this but, I'm sure this is not the first time someone has run into a similar issue with a model... so, have you tried searching around or asking on the Blender forums? or B3D forums, etc.?

As I have stated numerous times, I personally like this "feature bug" because it gives some life to the leaves... especially with the aspen leaves... because in real life, quaking aspen leaves (and some other tree's leaves) flicker with even the slightest breeze.

[D00Med]

I thought you meant rotating the file itself, not the degrotate. I'll try and take at this this weekend, I think it should be a simple solution, but what do I know.

I hope you're not being sarcastic :S I did try to rotate the model.

@TumeniNodes: xD I've had the problem before, apparently it's just because the...computer(idk the technical term for exactly what), can't pick out which face to render.

[Nathan.S]

I made a pull request that adds some rotation to all three axis of the leaves model, and as far as I could tell removed all flickering. FPS on my laptop maybe went up one or two with the changes to the model, removed two faces on it, as they were nearly duplicates of the existing faces. It's actually possible that those faces may have been causing the flickering, didn't really check that out at all. Feel free look at the changes I made in the model and just merge bits and pieces if you want.

[D00Med]

Thanks, it does improve it somewhat.
There is still flickering though :/

[TheReaperKing]

Just a heads up I think this mod works quite nicely with the fungi mod :)
viewtopic.php?f=9&t=16345

[azekill_DIABLO]

i don't care lag i have a geforce 750 GTi . and a big ego.

[D00Med]

i don't care lag i have a geforce 750 GTi . and a big ego.

lol, such a feeling of invincibility xD

[TumeniNodes]

i don't care lag i have a geforce 750 GTi . and a big ego.

DINKLEBURG!!!!!!

[D00Med]

Update: fixed the flickering (sorry TumeniNodes)
Also this is thanks to toby109tt and Nathan.S

[toby109tt]

also if anyone whants to see all the trees on a grid than you can use my custom tree map
(these are the exact same trees used in mapgen)
https://1drv.ms/u/s!Ammw1yWbBi3R5T_dzlSjYR0WIMTA

[D00Med]

Actually they aren't exactly the same, and a few aren't used, but still they are close enough

[TumeniNodes]

Update: fixed the flickering (sorry TumeniNodes)

whatevah.... (throws arms up and walks away)


:P

[Neuromancer]

This is absolutely beautiful. Noticed that the trees don't sway like the regular trees do when that is turned on. Also, sometimes I see the old school full node trunks when 2 trees are next to each other, and I like it. I'd like to see a mixture of full size and the smaller nodebox sized trunks next to each other like in a real forest with younger and older trees.

[Neuromancer]

Another thing I noticed is that there are no flowers when I install this mod (and plantlife) because there are too many trees packed in too tightly. (I think)

[D00Med]

I think that's probably because the mod clears all the decorations

[TumeniNodes]

Hey, I'm still getting flickering with the new DL... (I'm so happy) :D

But, it may be my textures from the TP I'm still in the process of trying to perfect...
I'll experiment with some other textures to see if I can get it in check.

But, even if I manage to make some textures which eliminate or reduce the flickering, I will still use the one which do personally : )

[D00Med]

Aaaah xD
Ok.

[burli]

I would like to use some parts of your mod in my subgame, but I don't want to use the whole mod. Do I have your permission for that? I want to use the tree schematics and the leaf object