[Old] [Windows] PilzAdam’s builds with gettext and Freetype

[jojoa1997]

for some reason either i don't get conected to serves or i only get 1 fps or it gets as high as 30 fps and then drops to 1 fps
ERROR[main]:TextureSource::buildMainAtlas<>:Atlas is full not adding more textures <---the error i keep getting

That happens from getting too many mods downloaded. What server is this?also to fix the problem put this in you minetest.conf (not Minetest.conf.example)

Your phone or window isn't wide enough to display the code box. If it's a phone, try rotating it to landscape mode.

Code: Select all

enable_texture_atlas = false

[Linxx]

for some reason either i don't get conected to serves or i only get 1 fps or it gets as high as 30 fps and then drops to 1 fps
ERROR[main]:TextureSource::buildMainAtlas<>:Atlas is full not adding more textures <---the error i keep getting

That happens from getting too many mods downloaded. What server is this?also to fix the problem put this in you minetest.conf (not Minetest.conf.example)

Your phone or window isn't wide enough to display the code box. If it's a phone, try rotating it to landscape mode.

Code: Select all

enable_texture_atlas = false

tested on redcrab server EDIT:fixed... for some reason the are i was on was affecting the fps or the mapgen not sure it just spawned in the spawn point and started to get the normal fps

[PilzAdam]

New build: 7f240ae-ttf

[Likwid H-Craft]

What is TTF?

[PilzAdam]

What is TTF?

Added to FAQ.

[Linxx]

i got this i don't know if it's the same error in faq but reporting it anyway "minetest.exe-entry point not found :the prodedure entry point curl_easy_escape could not be located in the dynamic link library libcurl.dll."

[Temperest]

I have the same issue, replacing the libcurl DLL did not help.

[PilzAdam]

New experimental build: new_emerge-df2d85f
We need some windows users to test this. Please post your testing results here.
Especially look for

Your phone or window isn't wide enough to display the code box. If it's a phone, try rotating it to landscape mode.

Code: Select all

err:ntdll:RtlpWaitForCriticalSection section 0x116a414 "?" wait timed out in thread 0024, blocked by 0029, retrying (60 sec)

(or similar) when generating new areas of the map.

[Linxx]

New experimental build: new_emerge-df2d85f
We need some windows users to test this. Please post your testing results here.
Especially look for

Your phone or window isn't wide enough to display the code box. If it's a phone, try rotating it to landscape mode.

Code: Select all

err:ntdll:RtlpWaitForCriticalSection section 0x116a414 "?" wait timed out in thread 0024, blocked by 0029, retrying (60 sec)

(or similar) when generating new areas of the map.

got the following error when making a world in singleplayer (ERROR[main]:Some exception "std::bad_alloc)

[Temperest]

Build locked up PC, had to reboot. Seemed to do so by eating HDD instead of CPU resources, since the light was just continuously on.

[PilzAdam]

New experimental build: new_emerge-df2d85f
We need some windows users to test this. Please post your testing results here.
Especially look for

Your phone or window isn't wide enough to display the code box. If it's a phone, try rotating it to landscape mode.

Code: Select all

err:ntdll:RtlpWaitForCriticalSection section 0x116a414 "?" wait timed out in thread 0024, blocked by 0029, retrying (60 sec)

(or similar) when generating new areas of the map.

got the following error when making a world in singleplayer (ERROR[main]:Some exception "std::bad_alloc)

Does it happen everytime you create a world?
Can you post the last ~20 lines of your debug.txt?

[PilzAdam]

New experimental build: new_emerge-df2d85f
We need some windows users to test this. Please post your testing results here.
Especially look for

Your phone or window isn't wide enough to display the code box. If it's a phone, try rotating it to landscape mode.

Code: Select all

err:ntdll:RtlpWaitForCriticalSection section 0x116a414 "?" wait timed out in thread 0024, blocked by 0029, retrying (60 sec)

(or similar) when generating new areas of the map.

got the following error when making a world in singleplayer (ERROR[main]:Some exception "std::bad_alloc)

Build locked up PC, had to reboot. Seemed to do so by eating HDD instead of CPU resources, since the light was just continuously on.

Thanks for testing.
Try adding

Your phone or window isn't wide enough to display the code box. If it's a phone, try rotating it to landscape mode.

Code: Select all

num_emerge_threads = 1

in minetest.conf and test again.

[sfan5]

Especially look for

Your phone or window isn't wide enough to display the code box. If it's a phone, try rotating it to landscape mode.

Code: Select all

err:ntdll:RtlpWaitForCriticalSection section 0x116a414 "?" wait timed out in thread 0024, blocked by 0029, retrying (60 sec)

(or similar) when generating new areas of the map.

Only wine outputs these types off error messages

[Linxx]

New experimental build: new_emerge-df2d85f
We need some windows users to test this. Please post your testing results here.
Especially look for

Your phone or window isn't wide enough to display the code box. If it's a phone, try rotating it to landscape mode.

Code: Select all

err:ntdll:RtlpWaitForCriticalSection section 0x116a414 "?" wait timed out in thread 0024, blocked by 0029, retrying (60 sec)

(or similar) when generating new areas of the map.

got the following error when making a world in singleplayer (ERROR[main]:Some exception "std::bad_alloc)

Does it happen everytime you create a world?
Can you post the last ~20 lines of your debug.txt?

it even happened when i tried multiplayer

[Mito551]

reporting on new_emerge
loaded fine, but what's the point? what does it provide? what kind of new features?

[PilzAdam]

reporting on new_emerge
loaded fine, but what's the point? what does it provide? what kind of new features?

Some changes in the emerge code, wich handles the mapgen threads etc.

[VanessaE]

Also, a few more notes:

Please be sure you add debug_log_level=1 (or a higher number, maximum of 4) to your minetest.conf BEFORE you run your tests.

Be sure when you report an error to indicate what OS you're actually running, what version of that OS, and some details about your hardware, specifically the number of processor cores.

Please be sure when posting an error that you get the information from debug.txt, and post the complete error message. Do not rely on anything written on the Minetest game screen after a crash.

[PilzAdam]

New build: 0183bda-ttf

[Mito551]

http://screenshot.su/show.php?img=c3f6300f2e7d8a2fbc44cec3e3751116.jpg

input in curl_easy_escape procedure is not found in DLL libcurl.dll

what the... can you help, please?

[BrandonReese]

I used the buildbot for my own build and got that error. I couldn't just get libcurl from dllfiles.com I got this file

http://curl.haxx.se/gknw.net/7.29.0/dist-w32/curl-7.29.0-devel-mingw32.zip

from curl.haxx.se and copied all the DLLs from the bin folder to the bin in minetest. Just copying libcurl.dll from that zip file said it was missing libidn-11.dll and after copying that it was missing libeay32.dll, so I just copied them all.

[Mito551]

thanks, that fixes it.

[cHyper]

New build: 0183bda-ttf

cool build...
u can change the sound in the game...
when u press the ESC-key yust click the sound-volume button...
there is a +/- for the sound...

awesome....

[PilzAdam]

I used the buildbot for my own build and got that error. I couldn't just get libcurl from dllfiles.com I got this file

http://curl.haxx.se/gknw.net/7.29.0/dist-w32/curl-7.29.0-devel-mingw32.zip

from curl.haxx.se and copied all the DLLs from the bin folder to the bin in minetest. Just copying libcurl.dll from that zip file said it was missing libidn-11.dll and after copying that it was missing libeay32.dll, so I just copied them all.

http://screenshot.su/show.php?img=c3f6300f2e7d8a2fbc44cec3e3751116.jpg

input in curl_easy_escape procedure is not found in DLL libcurl.dll

what the... can you help, please?

Could one of you test libcurl.dll of xyz's minetest builds?

[socramazibi]

I used the buildbot for my own build and got that error. I couldn't just get libcurl from dllfiles.com I got this file

http://curl.haxx.se/gknw.net/7.29.0/dist-w32/curl-7.29.0-devel-mingw32.zip

from curl.haxx.se and copied all the DLLs from the bin folder to the bin in minetest. Just copying libcurl.dll from that zip file said it was missing libidn-11.dll and after copying that it was missing libeay32.dll, so I just copied them all.

http://screenshot.su/show.php?img=c3f6300f2e7d8a2fbc44cec3e3751116.jpg

input in curl_easy_escape procedure is not found in DLL libcurl.dll

what the... can you help, please?

Could one of you test libcurl.dll of xyz's minetest builds?

test libcurl.dll of xyz's minetest builds , works well

[PilzAdam]

New build: 066b031-ttf
libcurl.dll should be fixed now.

[Ragnar]

Please add Estonian language, i could translate it :)

[PilzAdam]

Please add Estonian language, i could translate it :)

Done. You can translate it here: http://translate.minetest.ru/projects/minetest/core/et/

[PilzAdam]

New build: aa77ee6

[PilzAdam]

New build: 650e932-dungeons
Add this to minetest.conf and create a new world to get dungeons:

Your phone or window isn't wide enough to display the code box. If it's a phone, try rotating it to landscape mode.

Code: Select all

mg_flags = trees, caves, v6_biome_blend, dungeons

[cHyper]

New build: 650e932-dungeons
Add this to minetest.conf and create a new world to get dungeons:

Your phone or window isn't wide enough to display the code box. If it's a phone, try rotating it to landscape mode.

Code: Select all

mg_flags = trees, caves, v6_biome_blend, dungeons

how does dungeons look like?
any pictures of it???

awesome new stuff...